Temperature and humidity hydrogen sulfide three in one sensor

Temperature and humidity hydrogen sulfide three in one sensorThe Swiss temperature and humidity sensor probe SHT30 is used, which adopts MEMS technology and has been upgraded on the basis of the original SHT20 sensor, greatly improving the accuracy of measurement.

This product uses an electrochemical hydrogen sulfide gas sensor probe to measure the concentration of hydrogen sulfide in the air, with high sensitivity to hydrogen sulfide over a wide concentration range

parameter

Temperature measurement range -20 ℃ to 125 ℃

Temperature accuracy ± 0.2 ℃ (0-60 ℃ range)

Temperature resolution 0.01 ℃

Humidity measurement range 0-100% RH

Humidity accuracy ± 2% RH

Humidity resolution 0.01% RH

Hydrogen sulfide measurement range 0-100ppm

Hydrogen sulfide resolution 0.01ppm

Hydrogen sulfide measurement accuracy ± 2% FS

Supply voltage DC12V-24V

Consumption current<100mA

Preheating time<1 minute

Response time<10 seconds

Dimensions 145mm x 110mm x 45mm (H)

Weight<300g

Installation method: Wall mounted

Service life>2 years

Temperature and humidity hydrogen sulfide three in one sensorPrecautions

If the sensor needs to be placed in a narrow space, the space must be well ventilated;

2. The sensor must not be disassembled without permission, otherwise it may harm the sensor; If necessary, please consult customer service technical support;

3. Do not vibrate violently.