Low noise explosion-proof high-pressure blower

Before installation, conduct a preliminary inspection of the blower to ensure that there are no inorganic parts damaged during logistics transportation or long-term storage, whether there are any debris falling into the fan flow channel, whether there is corrosion, etc. Then use tools to rotate the fan spindle or the tail fan blades of the fan motor to see if the rotation is flexible and if there is any rubbing sound. Otherwise, the fault should be eliminated first.

Low noise explosion-proof high-pressure blowerselection

Due to the widespread use of high-pressure blowers, their selection is also relatively complex. Generally speaking, the following two steps need to be followed:

1. Need to determine what function of the high-pressure blower is used on site, whether it is suction or blowing, and find the corresponding pressure flow curve of the high-pressure blower; If the curve is misread, sometimes the selected product cannot be used;

2. Based on the calculated pressure and flow rate, find the working curve above the corresponding working point that satisfies both pressure and flow rates on the curve graph; Then select the high-pressure blower model based on the working curve;

As long as it is a different work site, its requirements for pressure and flow rate are different, so in order to obtain relatively accurate data, relevant calculations need to be carried out.

Low noise explosion-proof high-pressure blowerfeature

1. It has dual functions of blowing and suction, and can be used for both suction and blowing;

2. Running with little or no oil, the output air is clean;

3. Compared to centrifugal fans and medium pressure fans, their pressure is much higher, often more than ten times that of centrifugal fans;

4. If the pump body is die cast as a whole and shockproof mounting feet are used, the requirements for the installation foundation are also very low. It can even operate normally without fixing the feet, which is very convenient and saves installation costs and installation cycles;

5. Compared to similar fans, its operating noise is lower, just like our company's introduced vortex fan:

6. Maintenance free use; Its consumable parts are only two bearings, which basically do not require maintenance within the warranty period;

7. The mechanical wear of the vortex blower is very small because there are no other mechanical contact parts besides the bearings, so the service life is naturally very long. As long as it is under normal operating conditions, there is no problem for 3-5 years;