Meat slurry conveying pump

Meat slurry conveying pumpPerformance Characteristics

Strong adaptability: It can handle a wide range of media from low viscosity to high viscosity, including fluids containing solid particles, fibers, or gases, with strong adaptability.

Efficient and stable: Low speed design reduces shear force, smooth conveying process, continuous flow without pulse, avoiding meat pulp layering or component damage.

Reliable sealing: Using mechanical seals or special sealing structures to ensure no leakage and comply with food grade hygiene standards.

Wear resistant and durable: The rotor and pump body maintain clearance during operation, with minimal wear, long lifespan, and low maintenance costs.

Strong self-priming ability: It can be started without the need for a pump, simplifying the operation process and adapting to the transportation of gas containing media.

Reversible conveying: supports forward and reverse rotation, suitable for loading, unloading, and backwashing scenarios.

Meat slurry conveying pumpThe precautions for use are as follows:

1. Use the specified voltage, and the line voltage must not exceed plus or minus one tenth of the voltage specified on the pump nameplate before use.

2. Connect the motor after unboxing. And connect the motor immediately, so that the pump body and motor are integrated, and connect the water outlet pipe.

Before use, check that all components are in good condition before starting up for use.

4. It is not suitable for idle operation. When in use, stop the pump immediately after suction is complete. Otherwise, it will accelerate the wear of impeller seals, bearings, etc., and may also wear down the pump tubing.

5. Replace the electric brush in a timely manner when it is worn out and cannot be used. It is necessary to replace the two electric brushes in a timely manner (at the same time), otherwise it will cause poor contact between the electric brushes and the commutator, resulting in damage to the commutator and, in severe cases, burning out the armature.

6. Do not use in the following situations. If insulation damage, cracked or poorly contacted plugs and sockets, broken power cord or cable sheaths, intermittent operation, sparks or other faults are found during use, the motor housing should be repaired immediately. Do not use it before repair.

7. To prevent overload, in case of abnormal or reduced speed during use. Stop the machine immediately to check if there are any debris stuck in the impeller or if the motor has malfunctioned. When the pump brakes due to a problem, cut off the power immediately.

8. Use tools with care. All coating pumps should be handled with care to avoid impact.