Plastic PE float for interception and drainage

The plastic PE float for interception and drainage is installed as a floating device upstream of the water inlet of the hydropower station, used to intercept and guide floating objects on the water surface (such as branches, garbage, aquatic plants, etc.), prevent them from entering the generator set or diversion tunnel, and ensure the safe and efficient operation of the hydropower station.

　　Plastic PE float for interception and drainageIt is a self floating automatic river interception device, which includes a building concrete workbench set on the left bank of the river, a floating material treatment pool set on the right bank of the river and located downstream of the building concrete workbench, and a steel wire rope fixed cement pier spanning both sides of the river. The individual interception floats are connected in series by the steel wire rope to form a parabolic fox line overall interception row. When there is too much underwater garbage, it can also be combined by clamping the floats with steel plates and hanging nets. The underwater galvanized net achieves vertical effect through weighting, and this scheme has good interception effect. Both surface garbage and underwater garbage can be effectively intercepted, effectively preventing the spread of surface garbage.

　　Plastic PE float for interception and drainageSupport customization, clamp tube float, new raw material LLDPE (polyethylene), strong toughness, low odor. The clamped floating body is formed in one go without welding seams, easy to install, easy to clean, and resistant to ultraviolet radiation. The product is resistant to corrosion, collision, high temperature (80 ℃), freezing (-30 °), smooth inside and outside, and strong earthquakes.

The interception float of hydropower station adopts rotational molding technology, which is suitable for processing floating bodies with complex shapes and large volumes. One time molding, can produce thicker wall thickness, strong material aging resistance, seawater corrosion resistance, and can process various special colors. The plastic float is made of imported linear low-density polymer raw materials and is formed in one go using rotational molding technology. It has no welds, is sturdy and durable, and will not pollute the water quality of aquaculture. It is a rotational molding product. Floating products, due to their different uses and environments, have different shapes, individual dimensions, stress structure settings, and whether foam needs to be filled inside. Please provide detailed instructions on the usage requirements of the float when purchasing, so that our company can design a reasonable structure that better meets your usage requirements.