Polyurethane foaming machine mold insulation filling pouring

The model of the polyurethane high-pressure joint patching machine produced by our factory is a regular small joint patching machine High pressure small joint patching machine High voltage medium-sized joint patching machine

Polyurethane foaming machine mold insulation filling pouring

This product is a high-pressure medium-sized joint patching machine

length1350Width is1350height is1900

The advantage is:1High pressure injection ensures even mixing of the material and liquid, reduces waste of the material and liquid, and improves the yield rate

2/The injection head does not need to be cleaned frequently, and only requires regular maintenance and upkeep

Configuration as follows

Two options one: the material pump motor is5.5kwElectric motor with high-pressure plunger pump25mlThe individual flow rate is0.3-0.5Kilogram per second (adjustable flow rate)

2： The material pump motor is7.5kwElectric motor with high-pressure plunger pump40mlThe individual flow rate is0.4-0.8Kilogram per second (adjustable flow rate)

The material tank is a double-layer material tank, with water or oil injected into the middle layer and heated through a heating tube at the bottom of the tank

Single material tank for loading liquid200Kilogram, there is a liquid level display agent in the material tank

oil pump motor2.2kwThe pump station is equipped with components such as pressure regulating valves, solenoid valves, ball valves, oil circuit blocks, etc

Automatic feeding system, automatic feeding motor1.5kwEquipped with gear pump

weighs approximately500kilogram

Factory equipped with high-pressure pipelines18Mi, high-pressure non cleaning injection head, pipeline protected by nylon sheath, injection head with external lead, adjustable flow rate, can be freely controlled by injection head

The fuel tank is20L， Equipped with an accumulator, intelligent pressure gauge, relief valve, solenoid valve and other accessories, used for maintaining pressure (the intelligent energy pressure gauge sets the upper and lower limits of pressure, the pressure is at the upper limit, the oil pump stops boosting, the pressure is at the lower limit, the oil pump starts to rotate for boosting, the advantage is to avoid the oil pump motor from constantly rotating, the hydraulic oil overheating cannot provide pressure, and reduce the loss of the oil pump motor)

The heating system isTwo 1.5kw flange heating tubes and one black material tube heating device are used to heat the black material tube in winter

Polyurethane foaming machine mold insulation filling pouring

Equipment time setting: lifting time, pouring time, and returning time

Lifting time: Set the lifting time to ensure that the injection head lifts the rod within the set time. Expose the gap and wait for pouring

Pouring time: Different pouring times are set according to the size of the pipeline. The material pump runs simultaneously and stops at the arrival time

Return time: After the discharge is completed, it is necessary to wait for time to avoid returning the rod immediately, which may cause pressure in the material tank