Pressure filter (mechanical filter)

Overview

The scientific name of this device is: pressure filter, or mechanical filter

The working principle and design calculation of the device are based on "indoor water supply and drainage

Design specifications for hot water supply and outdoor water supply, etc.

According to the "Water Quality Standards for Domestic Use" in China, this design is suitable for

Used for industrial and mining enterprises and urban areas that require filtered and standardized water

Water treatment equipment.

This equipment has been summarized by our company's engineering and technical personnel from previous projects

Design and manufacture based on successful experience in design, with stable results and investment savings

Easy to operate, it is an ideal water supply equipment.

Scope of application

1. The filter in this design is divided into two types, which enter according to the inlet water situation

Row selection.

When the turbidity of the raw water is often within 100 milligrams per liter

Raw water that has undergone coagulation and sedimentation (such as used for long-term high turbidity raw water)At this time, attention should be paid to shortening the operating cycle or reducing the filtration rate, so as toWhen using, coagulant should be added in front of the filter, and in this case, a dual coagulant should be usedLayered filter material filter.

3. Single layer filter media filters are suitable for raw water turbidity, generally in

Below 15 milligrams per liter, with a maximum of around 20 milligrams per literThe precipitation water.

If this device is used in cold regions, it can be customized according to local materialsSelect insulation measures for materials and technical conditions.