QZJ type fully automatic water purifier

Overview

The QZJ fully automatic water purifier is a new type of water treatment device widely used for purifying surface water turbidity, suitable for drinking water and

Small and medium-sized industrial water plants, industrial and mining enterprises, military units, schools, etc. The water purifier, with its unique structure and scientific utilization of hydraulics, achieves full automation

Efficient operation, no need for manual operation, no increase in power, making it a perfect energy-saving and energy-saving water purification equipment.

working principle

The fully automatic water purifier measures the dosage of flocculant through a mixing and metering dosing system, enters the raw water inlet pipe, and mixes with the raw water through a tube mixer,

After the reaction in the folded plate reaction tank, it enters the inclined tube sedimentation tank. After the separation of flocs and water, the clean water enters the filter tank through the collection tank for filtration, and then obtains qualified products

Drinking water (industrial water). The two main features of the automatic operation of this device are:

1. Sedimentation site, through the water level difference from the collection tank to the filter tank, and then through the suction pipe to the sedimentation tank for sludge discharge, causing negative pressure in the sludge discharge pipe for a certain period of time

Implement siphon suction and sludge discharge in the sedimentation tank.

2. In the filter area, after a certain period of operation, due to an increase in suspended solids and high resistance in the filter, the water level rises and reaches the top of the backwash pipe,

It forms an automatic siphon recoil.

Operation and Usage

1. Fill the drainage well under the automatic mud pipe with water.

2. Administer medication, then start the water pump and observe the turbidity of the effluent from the sedimentation tank. Adjust the dosage until the effluent turbidity meets the requirements. Observe the sedimentation tank automatically

Adjust the land tax of the water storage tank moderately based on the length of the sludge discharge cycle until the backwash time is reached.

3. During the initial operation, observe the strength of the backwash water and adjust the backwash brake until satisfactory results are achieved, based on the absence of filter material.

Filter material filling