Professional production of impact and wear tester for protective fu

NegotiableUpdate on 02/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The professional production of the Fu impact and wear tester is designed to test the protection of motorcycle riders against wear and tear caused by impact while riding on gravel roads.

Product Details

Professional production of impact and wear tester for protective fuProfessional production of impact and wear tester for protective fu

1、 Introduction‌

Test the protection of motorcycle riders against wear and tear caused by impacts while riding on gravel roads.

Intelligent control, the testing frequency and requirements can be set on the control panel. As long as the required parameters are entered in the console, the machine will automatically cycle through testing. During the testing process, the test can be paused at any time, the safety door can be opened, and the degree of sample loss can be observed;

Adopting servo drive, the motor response time is short, without speed overshoot or uneven speed phenomenon;

2、 Key parameters‌

Parameter items	Specifications
control system	Industrial grade PLC
operating interface	Colorful 7-inch touch screen, switching between Chinese and English
Operation method	Full touch operation, capable of setting, calling, and modifying test programs
printer	Embedded printer
Belt transmission speed	8m/s
The hardness of the belt	Particle size OP60
wear area	1963mm2
Apply force to the sample	49N
Net pressure on the sample	25kPa
Falling height	50mm
Sample holder	Diameter Φ 75mm
cleaning brush	Diameter Φ 200mm, polypropylene bristles 0.2mm, free length 45mm;
USB testing software socket, capable of reading data and connecting to a computer