Stability testing of sliding friction coefficient tester for artificial board

NegotiableUpdate on 02/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The sliding friction coefficient tester for artificial boards uses a force transmission device to apply a constant torque to the rotating shaft, driving the base of the test bench. The software automatically collects test data to measure and calculate the sliding friction coefficient

Product Details

Stability testing of sliding friction coefficient tester for artificial boardStability testing of sliding friction coefficient tester for artificial board

1、 Introduction

The sliding friction coefficient tester for artificial boards is a professional equipment used to measure the surface sliding friction coefficient of artificial boards, widely used in the fields of artificial board production, scientific research, and quality inspection.

working principle

Using a force transmission device to apply a constant torque to the rotating shaft, driving the test bench base, the software automatically collects test data to measure and calculate the sliding friction coefficient

2、 Key parameters

Parameter items	Specifications
control system	Industrial grade PLC
operating interface	Colorful 7-inch touch screen, switching between Chinese and English
Operation method	Full touch operation, capable of setting, calling, and modifying test programs
printer	Embedded printer
Torque sensor	0N · cm~4000N · cm (adjustable) accuracy ± 20N · cm resolution 0.01N · cm (optional with other accuracies)
lifting height	Adjustable from 10mm to 300mm
Test time	0s-999999s can be set
Twist direction	Clockwise and counterclockwise
Load weights	2.5kg, 5kg, and 10kg each
Drive Type	Servo motor driven friction rotating shaft
turntable diameter	100mm
Wheel friction foot	Material: sole rubber, Shore hardness: D60, specifications: approximately length X width X thickness of 2mmX2mmX5mm, density: 1.04g/cm
Sample Specifications	Length (450 ± 5) mm; Width (450 ± 5) mm (optional with other sizes)
test point	Samples can be selected for testing at different locations
Overall dimensions	The whole machine is approximately 800x700x1550mm (L * D * H)
weight	About 350kg
security configuration	Emergency stop button, overload protection
power supply voltage	AC220V50Hz
USB testing software socket, capable of reading data and connecting to a computer

‌3、 Execution standards and applicable scenarios

meet the standards

Strictly follow the testing items of GB/T17657-2022 as follows:

Measurement of sliding friction coefficient

Typical applications:

1. Factory quality inspection of artificial board production enterprises.

2. Performance verification of decorative artificial boards.

3. Material research and development in scientific research institutions and universities.

4. Compliance testing by third-party quality inspection agencies.

5. Incoming material inspection for furniture manufacturing enterprises.

4、 Operation process

1. Start the tester and the friction head drives the sample to slide uniformly in a straight line along the surface of the paired material.

During the experiment, observe the operation status of the instrument. If there are any abnormal situations such as sample deviation or fixture loosening, the experiment should be stopped immediately, and the sample should be reinstalled before testing.

3. Each sample should be tested three times, and the surface of the paired material should be cleaned after each test to avoid residual debris affecting subsequent test results.

4. After completing all tests on 3 samples, save all test data

5、 Configuration List

1 host;

1 copy of instruction manual;

1 certificate of conformity;

1 warranty card;

One copy of the delivery receipt;

1 nameplate;

1 power cord;

1 set of wrench;

Several brochures;