RS6917 integrated vibration transmitter

The RS6917 integrated vibration transmitter has a standard 4-20mA current output and can be directly connected to DCS, PLC or other equipment, truly realizing the "sensor ten monitoring instrument" vibration monitoring function. This product is easy to observe on site, has excellent performance, and is relatively affordable compared to vibration monitoring instruments. It is an ideal choice for factory equipment vibration measurement and monitoring.

RS6917 integrated vibration transmitter

Frequency response: 5-1000 Hz

2. Natural frequency: 4.5Hz or 10Hz

3 Measurement range: 0-20mm/s (effective velocity) or 0-200um (peak to peak displacement)

4 signal output: 4-20mA (± 0.05mA)

5 output impedance: ≤ 500 Ω

6 Working voltage: DC24V ± 10%

7 Wiring method: 2-wire system

8 Measurement direction: Universal

9. Operating environment: Temperature -40 ℃~100 ℃, relative humidity ≤ 90%

10 Dimensions: φ 35 × 70mm

11 Installation thread: M10 × 1.5 × 10

12 Weight: Approximately 300g

Can be widely usedSubmersible pumpMeasurement and real-time monitoring of bearing vibration in rotating machinery such as fans, steam turbines, coal mills, oxygen concentrators, generators, centrifuges, compressors, water pumps, and motors. At the same time, it can also be applied to monitoring environmental vibration values for equipment such as underground pipelines and the automotive industry

Installation location:Install vertically or horizontally on the tested vibration point, fix the sensor bottom M10 × 1.5 × 10 screws on the tested housing, and then tighten the sensor on top，You can also choose to install it on a strong magnetic base.

Installation dimensions and specifications:Refer todownWhen the installation location of the transmitter is subjected to high temperature steam erosion, protective measures need to be taken to reduce the ambient temperature of the transmitter. Generally, no protection is required.

Wiring instructions:redConnect the wire to the positive terminal of the DC24V power supply,brownColor wire connectionsignalA, blueWire connection signalB， Black wire connected to COMThe connecting wire requires good insulation performance, and adoptsfourCore shielded cable.