Rotary grille machine

The rotary grid machine equipment is made of ABS engineering plastic, nylon or stainless steel shaped rake teeth, which are assembled on the rake shaft in a certain arrangement order to form a closed rake tooth chain, and its lower part is installed in the water body of the inlet channel. When the transmission system drives the sprocket to rotate uniformly and directionally, the entire rake chain moves from top to bottom, carrying solid debris and separating it from the liquid. The fluid flows through the gaps of the rake teeth, and the entire working state continues. Due to the structural shape of the rake teeth, when the rake tooth chain carries debris to the upper end and moves in reverse, there is a relative self-cleaning motion between the front and rear rake teeth, which causes the debris to fall off by gravity.

Mechanical grille, also known as rotary grille cleaning machine, GSHZ type grille cleaning machine, XQ type grille cleaning machine, GF type grille cleaning machine, GSHP type grille cleaning machine, HXG type mechanical grille, rake type mechanical grille, rainwater grille, pump station grille, rotary grille cleaning machine

Rotary grille machineScope of Application

1. Clean the debris on the fine grid between the pumping station and the inlet of the water supply and drainage project.

2. Solid liquid separation of industrial wastewater from textile, printing and dyeing, slaughtering, leather and papermaking industries.

3. Solid liquid separation in sugar production, brewing, and food processing.

Main Features

·Compact structure, simple electrical control, easy to achieve automation;

·Good corrosion resistance, low energy consumption, and low noise;

·Continuous cleaning action, clean slag discharge, and high separation efficiency.

4、 Model representation method

X G ━ □×□

Canal depth (mm)

Grille width (mm)

Installation Diagram

Note: The equipment is installed by lifting the whole machine, and no other supports are required on both sides of the water collection well. Only two 620 × 150 × 16 steel plates are pre embedded on the ground, and the supporting steel plates on both sides of the rack are welded together during installation.

Technical parameters and installation dimensions

The selection is determined by the water flow rate and lifting height, and different grilles are selected according to the size of the separated debris.