Rubber vacuum belt filter for mud separation

Rubber vacuum belt filter for mud separationIt is a continuous solid-liquid separation equipment driven by vacuum negative pressure, and its core structure consists of an annular rubber filter belt, a vacuum chamber, a filter cloth, and a driving device. The rubber filter belt serves as a vacuum chamber carrier and is equipped with drainage grooves on its surface, which run synchronously with the filter cloth. The equipment creates a negative pressure environment through a vacuum pump, allowing the filtrate to pass through the filter cloth and enter the vacuum chamber. Solid particles are intercepted to form a filter cake, achieving solid-liquid separation. Its modular design supports flexible assembly and is suitable for large-scale industrial production scenarios.

Product function

Solid liquid separation core: Efficient separation of solids and liquids in the slurry is achieved through vacuum suction, forming a low moisture content filter cake.

Purification of filter cake: After filtration, washing solution is introduced and residual impurities in the filter cake are replaced or dissolved through a vacuum system to improve product purity.

Resource recycling: Dehydration treatment of tailings, waste residue and other materials to recover valuable components and reduce waste emissions.

Process optimization: Integrating multiple processes into one, shortening production cycles, and reducing labor and equipment costs.

Scope of application

At present, it has been widely used in industries such as metallurgy, mining, petrochemicals, chemical engineering, coal washing, papermaking, fertilizers, food, pharmaceuticals, and environmental protection for solid-liquid separation, and gypsum dehydration in flue gas desulfurization.

Rubber vacuum belt filter for mud separation

Technical Specifications

Host installation appearance

Process Flow Diagram

Adopting reverse flow rinsing and spray rinsing devices, and adopting either forward flow washing or reverse flow washing methods according to the requirements of materials and processes, for better material cleaning.

application

Precautions for use

Pre-start inspection

Confirm that all connecting parts are not loose, and add lubricant to the rotating parts.

Check whether the vacuum chamber and filter cloth are obstructed by foreign objects to ensure smooth operation of the equipment.

Monitoring during operation

Regularly check parameters such as vacuum degree and filter belt speed to ensure stable operation of the equipment.

Observe the wear of the filter cloth, replace the damaged filter cloth in a timely manner, and prevent leakage.

Maintenance after shutdown

Clean the filter cloth and belt, remove residual particles, and prevent blockage.

Check the oil level and sealing of the vacuum pump, and clean the crystallization or impurities in the pipeline.

safe operation

Avoid touching moving parts during device operation to prevent mechanical injury.

Regularly inspect the electrical control system to ensure good grounding and prevent the risk of electric shock.