SFS20-A03-B05-C02 integrated vibration transmitter

SFS20-A03-B05-C02 integrated vibration transmitter

1. Product Introduction:

SFS20-A03-B05-C02 integrated vibration transmitterWith the popularization of industrial automatic detection systems and DCS systems, the functions of traditional secondary meters can be basically implemented by DCS systems, which only require a 4-20mA signal input. The integrated casing vibration transmitter produced by Shanghai Huaying Automation Instrument Co., Ltd. can well meet this requirement. It has a small size, light weight, integrated structure, is sturdy, durable, high temperature resistant, impact resistant, waterproof and explosion-proof, and can withstand harsh environments. It can be installed in multiple ways and has a variety of vibration ranges, which can meet the application requirements of various occasions. This integrated vibration transmitter provides a 4-20mA current output corresponding to the measured value. And it has good stability, reliability, and strong anti-interference ability.

2. Application scope:

The integrated casing vibration transmitter produced by Shanghai Huaying Automation Instrument Co., Ltd. is widely used for vibration measurement of rotating machinery and other equipment such as blowers, centrifuges, compressors, steam turbines, water pumps, motors, fans, large pumps, turbochargers, etc. in industries such as power, steel, petrochemicals, and coal mines. The various vibration levels during equipment operation are important indicators for estimating whether the equipment is running normally.

3. Technical indicators:

1. Measurement range: Frequency: 10-1000Hz
Amplitude: 0-200um 0-500um 0-800um (peak to peak)
Intensity: 0-20mm/s 0-25mm/s 0-50mm/s (true effective value)

2. Measurement accuracy: ± 0.5 level, linear error ≤ 1% FS
3. Measurement method: Vertical or horizontal
4. Output signal: Current output: 4-20mA (load ≤ 1K Ω)
5. Environmental temperature: -10~65 ℃ (relative humidity ≤ 85%)
6. Power supply voltage: DC24V (power consumption ≤ 3W)
7. Dimensions: 35 × 75 (mm)
8. Fixed screw hole: M10 × 1.5 × 10mm

9. Shell material: stainless steel

10. 重量：350g左右

4. Product size

Product diagram of integrated vibration transmitter

5. Wiring method: