Sales of METRIX series transmitters and ST5484E vibration transmitters

Sales of METRIX series transmitters and ST5484E vibration transmitters

The vibration transmitter st5484e-151-434-22 from the United States uses the principle of piezoelectric measurement to measure the vibration velocity of rotating machinery. It integrates the vibration sensor and signal processing circuit in a stainless steel housing, providing a solution for measuring the magnitude of mechanical vibration values and outputting a 4-20mA signal proportional to the vibration velocity. The output signal can be directly transmitted to a programmable logic controller (PLC), distributed control system (DCS) monitor, or other 4-20mA input monitoring instruments. Widely used in fans, blowers, generators, centrifuges, compressors, pumps, and motors.

Product Features

Provide 4-20mA signal output proportional to vibration velocity

Directly connect with PLC, DCS or other control systems

Two wire power supply, non-polar connection

Choose different wiring methods and thread processes for connection

Optional high-low pass filter

application

Blower centrifugal separator

Compressor engine

Electric motor generator

Fan turbocharger

Turbopump

Measuring principle

By using piezoelectric crystals to deform under pressure, charges are generated and processed through circuits such as amplification, filtering, detection, and integration to output 4-20mA proportional to the vibration velocity.

Technical Specifications

Vibration range: Refer to the selection guide and output a 4-20mA signal proportional to the vibration velocity

Accuracy: 2% (repeatability)

Dynamic signal: acceleration of 100mv/g

Frequency response: 2-1500hz (120-90000 rpm)

Sensing direction: arbitrary

Power supply: 16-30VDC, non-polar terminal

Electrical connection: optional

Shell material: 304ss

Temperature range: -45 ℃ -+100 ℃

Relative humidity: ≤ 99%

Shell protection level: NEMA 4x IP65 IP67

Explosion proof rating: nepsi, ex ia iic t4 intrinsic safety