Scope of use of integrated prefabricated pump station

Scope of use of integrated prefabricated pump station

Everyone knows that integrated prefabricated pump stations are an ideal replacement for traditional concrete pump stations in recent years, widely used in municipal infrastructure construction projects with a wide range of applications. Industry insiders are also very optimistic about its prospects. The integrated prefabricated pump station adopts a standard vertical type, which is a lifting equipment for lifting sewage, rainwater, drinking water, and wastewater. It is a turnkey pump station produced and assembled by the factory and transported to the site for installation. The integrated pump station is composed of accessories such as cylinder, water pump, grille, control system, pipeline, etc. Siyuan integrated prefabricated pump station, fully automated control, adopting new technologies to change land occupation and cycle problems, efficient and environmentally friendly, cost saving, and more conducive to later maintenance. The intelligent bottom design of the prefabricated pump station adopts a concave structure that can resist the pressure of groundwater without deformation. At the same time, only a small amount of sewage is allowed to stay in the pump pit. When the pump is restarted, the high flow rate near the pump pit can achieve self-cleaning effect, eliminating manual dredging. Traditional pump stations use concrete as the pump body material, which occupies a large area and is costly. It requires regular maintenance and should be treated differently according to different working conditions. Prefabricated integrated pump stations have broken through the constraints of traditional methods and made innovative attempts in many aspects. It is "one-piece", consisting of a complete set of equipment and standard accessories that can be centralized. Meanwhile, during the installation process, they are all buried underground with minimal soil damage and have no impact on the surrounding landscape. Secondly, the quality of the material. The cylinder of the device is made of fiberglass composite material, and the internal accessories are made of anti-corrosion materials such as hot-dip galvanizing, which does not require long-term maintenance and provides more reliable use. The prefabricated integrated pump station has achieved a customized production mode. Pre fabricated according to customer requirements and actual working conditions, with higher efficiency and more convenient use. soScope of use of integrated prefabricated pump stationVery broad, if you need to learn more, you can consult online or offline directly!

Performance and parameters of standard vertical integrated prefabricated pump station

1. Cylinder diameter: 800-3800mm

2. Cylinder height: 1000-160000mm

3. Flow range: 5-3600m3/h

4. Pump power: 0.75kw-160kw Structure of buried integrated prefabricated pump station: The main structural part of the buried integrated prefabricated pump station is its shaft, which is made of fiberglass material. During manufacturing, a steel frame is built according to the size of the cylinder, winding angle, pre crack angle, and the influence of carbon nanotubes on the compression behavior of the winding cylinder. Fiber composite materials are inserted into the holes of mechanical equipment and mixed with special adhesive to wrap the cylinder in circles. The increase of winding angle reduces the compression strength of the cylinder and increases the strain, except for the 40 ° winding angle, whose compression strength and strain are less than 20 °, 60 °, and 80 °. The compression modulus continues to decrease with increasing angle, and the compression efficiency increases with increasing angle.

The integrated prefabricated pump station itself is a cylinder with a manhole. Personnel can pass through the manhole and descend from the ladder to the inspection platform. Sewage enters the cylinder through pipelines, and a basket is installed at the inlet of the cylinder to block some garbage (the barrier capacity is not very good). There is a submersible sewage pump at the bottom of the pump station. Usually, there are at least two pumps, one in use and one backup, which are started in rotation as backups for each other.