Secondary activated carbon adsorption box 210 stainless steel small exhaust gas treatment

NegotiableUpdate on 04/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The dust filtration efficiency of the secondary activated carbon adsorption box 210 stainless steel small exhaust gas treatment is directly related to the safety of the working environment and the service life of the equipment. This device uses a three-stage filtration system of "pretreatment+main filtration+exhaust gas purification" to accurately capture grinding dust of different particle sizes. The HEPA high-efficiency filter can filter dust above 0.3 μ m with a filtration efficiency of over 99.97%. The abstract will briefly explain the filtering principle and core component functions of the dry polishing table, as well as the key points of replacing the filter screen and cleaning the dust during daily maintenance, to help users quickly grasp and improve the filtering effect of the polishing table

Product Details

二级活性炭吸附箱210不锈钢小型废气处理

Secondary activated carbon adsorption box 210 stainless steel small exhaust gas treatment

Dry polishing table is a dust treatment equipment used in industrial manufacturing, furniture processing, automobile maintenance and other fields. Its core value lies in capturing the dust generated during polishing operations in a timely manner through an efficient filtration system, avoiding the spread of dust into the air and causing environmental pollution and health hazards to personnel. To understand the efficient filtration mechanism of a dry polishing table, it is necessary to start with its structural design and working principle, while mastering scientific maintenance methods, in order to ensure that the polishing table can achieve long-term stable dust removal effect.

Firstly, the filtration system of the dry polishing table consists of three parts: a pretreatment device, a main filtration unit, and an exhaust gas purification device, forming a three-stage filtration loop. When dust is generated during polishing operations, it is sucked into the interior of the polishing table under the negative pressure of the fan. It first passes through a pre-treatment device, usually a metal grille or initial filter screen. This step mainly intercepts large particle dust (particle size greater than 10 μ m), such as wood debris, metal abrasives, etc., to avoid direct impact of large particle dust on the main filter unit, causing blockage or damage to the filter screen and extending its service life. The preprocessed dust enters the main filtration unit, which is the core guarantee for the filtration efficiency of the dry polishing table. Mainstream equipment often uses HEPA high-efficiency filters or membrane filter cartridges. The filtration principle of HEPA filter is to firmly lock in small dust particles through the inertial collision, diffusion adsorption, electrostatic attraction, etc. between dust particles and filter fibers. Especially for fine particles above 0.3 μ m, the filtration efficiency can reach over 99.97%, effectively solving the problem of fine dust pollution in polishing operations. After passing through the main filter, the exhaust gas is purified by exhaust purification devices such as activated carbon filters to adsorb harmful gases or odors in the dust, and finally discharged into clean air that meets environmental standards.

Secondly, the efficient operation of the dry polishing table relies on standardized daily maintenance, among which the maintenance and replacement of the filter screen are key. During use, the filter screen of the polishing table will gradually accumulate dust. If not cleaned in time, it will increase ventilation resistance and fan load, which not only reduces filtration efficiency but may also damage the equipment. Therefore, users need to regularly check the contamination of the filter screen. For washable primary filters, it is recommended to clean them once a week, air dry them before installation and use; For HEPA filters or filter cartridges, they cannot be washed with water and should be replaced regularly according to usage frequency and dust concentration. It is generally recommended to replace them every 3-6 months. If the dust concentration in the working environment is high, the replacement cycle should be shortened. In addition, the maintenance of the dust cleaning system of the dry polishing table is also crucial. Some equipment is equipped with pulse dust cleaning devices, which periodically blow back the filter screen through high-pressure airflow to remove dust on the surface of the filter screen. Users need to regularly check whether the electromagnetic valve, spray pipe and other components of the pulse cleaning device are working properly to ensure smooth operation of the cleaning system. At the same time, it is necessary to keep the interior of the polishing table clean and regularly clean the dust collection box at the bottom of the equipment to avoid excessive dust accumulation that may affect the operation of the equipment.

In addition, when using a dry polishing table, some operational details should be noted to improve the filtering effect. For example, during homework, the polishing tool should be placed near the suction port of the polishing table to reduce dust dispersion; Avoid stacking debris near the polishing table to ensure smooth ventilation; According to the different polishing materials, choose the appropriate filter type. For example, when polishing metal materials, choose wear-resistant metal fiber filters, and when polishing wooden materials, choose activated carbon composite filters with stronger adsorption properties. At the same time, it is necessary to regularly check the operation status of the grinding table's fan. If problems such as excessive fan noise and insufficient air volume are found, they should be promptly repaired to ensure the normal operation of the equipment.

In short, the dry polishing table achieves efficient capture and purification of polishing dust through a scientific three-level filtration mechanism, and standardized maintenance and correct operation are the key to ensuring its long-term stable operation. Users should fully understand the filtering principle and maintenance points of the polishing table during use, regularly inspect and maintain the equipment, in order to maximize the dust removal effect of the polishing table, create a safe and clean working environment for operators, and meet environmental protection requirements.

Secondary activated carbon adsorption box 210 stainless steel small exhaust gas treatment