Simple operation and testing of dental module brush grinder

NegotiableUpdate on 02/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The dental module brush grinder is easy to operate and suitable for testing the cleaning rate of external color spots in toothpaste. Through experiments, it is possible to effectively compare and evaluate the relative cleaning rate of toothpaste for exogenous pigmentation, providing scientific basis for determining relevant technical indicators.

Product Details

Simple operation and testing of dental module brush grinder

1、 Instrument Introduction:

Suitable for testing the cleaning rate of external color spots in toothpaste. Through experiments, it is possible to effectively compare and evaluate the relative cleaning rate of toothpaste for exogenous pigmentation, providing scientific basis for determining relevant technical indicators.

2、 Key parameters‌

Parameter items	Specifications
control system	Industrial grade PLC
operating interface	Colorful 7-inch touch screen, switching between Chinese and English
Operation method	Full touch operation, capable of setting, calling, and modifying test programs
printer	Embedded printer
Testing station	9 workstations
Test count	0 times -99999 times
test frequency	0r/min-150r/min (adjustable)
Testing direction	X. The Y-axis direction can be changed
Vertical pressure	150 ± 2g can be optionally equipped with other pressures
security configuration	Emergency stop button, overload protection
power supply	AC 220V/50Hz
Overall dimensions	Approximately 680 * 750 * 1100mm
USB testing software socket, capable of reading data and connecting to a computer

‌3、 Execution standards and applicable scenarios‌

meet the standards

GB/T43576-2023 Laboratory Test Method for Toothpaste Effectiveness in Removing Exogenous Stains in Oral Cleaning and Care Products

Batch quality inspection;

Third party laboratory certification.

4、 Example of Operation Process‌

Install the standard toothbrush and dental grinding block onto the grinding device, adjust the vertical pressure of the toothbrush on the dental block to 150g ± 2g, and then set the back and forth frequency of the grinding device to 100r/min. Add toothpaste slurry and control abrasive slurry to the slurry cups of the sample group and control group, respectively. Add an equal volume of slurry to each slurry cup to ensure that the slurry completely submerges the dental grinding block. Start the grinding device and make 600 round trips to the teeth.
After brushing and grinding, remove the dental grinding block and rinse it with water three times until there is no visible tooth pulp residue. Dry the surface moisture with paper and measure the enamel whiteness value (L) within 10 minutes using a colorimeter.
Note: A new toothbrush needs to be replaced during each experiment. There may be sedimentation phenomenon in the few plate samples, and the dental pulp should be stirred during the process.

5、 Configuration List

1 host;

1 set of testing software;

1 copy of instruction manual;

1 certificate of conformity;

1 warranty card;

One copy of the delivery receipt;

1 nameplate;

1 power cord;

1 set of hexagonal wrench;

Several brochures;