Stacked filter manufacturer fully automatic filter

Stacked filter manufacturer

The core component of a disc filter is a stacked plastic filter disc with grooves or edges made on it. The grooves or edges on adjacent filter discs form a channel of a certain size, and suspended particles with a particle size larger than the channel size are intercepted to achieve filtration.

Stacked filter manufacturer technical point

1. Filtration: Different degrees of filter laminates can be selected according to water requirements, with various specifications such as 20 μ, 55 μ, 100 μ, 130 μ, 200 μ, 400 μ, etc.

2. Backwash: Speed and backwash can be completed in about 7-15 seconds, with a backwash water consumption of less than 0.5% of the filtered water.

3. Fully automatic operation, continuous water discharge: In the filter set, the backwashing process alternates alternately, automatically switching between working and backwashing states, allowing for continuous water discharge with minimal system pressure loss.

4. Modularization: Modular system design, users can configure as needed, simple and flexible, and interchangeable.

5. Land saving: Flexible use of corner space, tailored installation, and minimal land occupation. If the processing water volume is 300 cubic meters per hour, the equipment with a filtration level of 100 μ for general water quality occupies only 3 square meters.

6. Reliable operation and simple maintenance: almost no daily maintenance required, easy installation and operation, components tested and tested by the factory, no tools required, and very few spare parts needed

7. Long service life: The technology plastic filter element is sturdy, wear-resistant, and corrosion-resistant. After years of industrial practical verification, the filtration and backwashing will not deteriorate over time.

point

Filtration: Different degrees of filter discs can be selected according to water requirements, with various specifications such as 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns, etc. The filtration ratio is greater than 85.

Backwash: Due to the opening of the filter pores during backwashing and the centrifugal spray effect, it achieves cleaning that other filters cannot achieve. The backwashing process of each filtering unit can be completed in just 10 to 20 seconds.

Fully automatic operation, continuous water discharge: time and pressure difference control backwash start. In the filter system, backwashing is carried out sequentially between each filtering unit and workstation. Automatic switching between working and backwashing states, continuous water discharge, minimal system pressure loss, and filtration and backwashing will not deteriorate due to usage time.

Modular design: Users can choose the number of parallel filtering units according to their needs, with flexibility and interchangeability. Flexible utilization of on-site corner space, installation according to local conditions with less land occupation.

Easy maintenance: Almost no daily maintenance required, no tools needed for inspection, and very few detachable parts.

Installation precautions

1. The equipment should be installed in a bypass manner to facilitate maintenance and repair without shutting down the machine.

2. This equipment can be installed horizontally or vertically according to the site conditions. The equipment must be connected to the pipeline in the direction of the inlet and outlet. When installed vertically, the inlet of the equipment faces upwards, and when installed horizontally, the outlet faces downwards.

3. Valves should be installed at the inlet, outlet, and drain outlet of the equipment (the drain valve should be a quick acting valve).