Stainless steel steam water separator

AS-16PStainless steel steam water separator

AS-16PStainless steel steam water separator

Note: Carefully read the section before performing installation operations“Safety Information”.3.1 Check the values of materials, pressure, and temperature. If the operating conditions of the product are lower than the system it is installed in, ensure that there are safety devices in the system to prevent overpressure.3.2 Check if the installation position and flow direction are correct.3.3 Remove the protective cover from all interfaces.3.4 The separator should be insulated and protected as needed.3.5 installASInstalled on a horizontal pipeline with the drainage outlet facing vertically downwards. All calibers of separators are equipped with mounting brackets to reduce pipeline load, with two drilled holes on each bracket. In order to ensure that the liquid in the separator is discharged as soon as possible, the discharge port must be connected to a suitable discharge valve or steam trap. Recommend using a float type drain valve. Floating ball drain valves have the characteristic of draining water as soon as it is available. For situations where air is present in the air, it accumulates at the top of the separator. In this case, install a suitable vent valve at the vent port. If the vent valve is not installed, the plastic protective cover must be removed and replacedclass3000lbThe carbon steel plug.3.6 Debugging ensures that the system runs smoothly after installation or maintenance. Test on alarm or protective devices.3.7 Installation example3.8 Operating the separator for gathering gas/Separate the small droplets contained in the steam flow. Relatively heavy droplets fall into the separator discharge interface after hitting the inner baffle and are discharged from the system by the steam trap valve. If used in air or gas distribution systems, the discharge valve is used to remove them. Repair: Please read the section carefully before performing any repair operation“Safety Information”There are no internal components that need to be repaired!VIASSteam water separator, steam separator, drain valve, Wenzhou separator maintenanceThe device must be installed correctly and qualified operators must follow the operating instructions for debugging and maintenance in order to ensure its safe operation. Use tools and safety measures correctly. When installing pipelines and equipment, follow the installation and safety guidelines. Isolation: Failure to close the isolation valve during installation and maintenance can cause damage to system components and harm to human health. The danger also includes: closing protective devices and air ducts or alarm systems. Ensure that the isolation valve is closed to avoid system impact. Pressure: Before maintenance and repair, it is necessary to consider whether there is any medium in the pipeline. Before repairing the product, ensure that the pressure medium has been isolated and the safety airway has been connected to the atmosphere. This can be easily solved by installing an exhaust valve. Even if the pressure gauge indicates zero, do not assume that the system is empty. Temperature: After closing the isolation valve, there should be a period of time to bring the temperature of the operating area close to room temperature to avoid burns. A protective jacket is necessary. Disposal: The product can be recycled. Proper handling will not cause ecological problems. When the usage situation is very important or the environment is complex, please provide the design drawings as much as possible for our experts from Yingke to review and check for you.