Suction vortex air pump

Suction vortex air pump

Suction vortex air pumpThe mechanical wear is very small because there are no other mechanical contact parts besides the bearings, so the service life is naturally very long. As long as it is under normal usage conditions, 3-5 years is no problem.

Airflow calculation:
Air volume (Q): The so-called air volume (also known as volumetric flow rate) refers to the velocity of the airflow passing through the cross-sectional area of the air duct, which is generally expressed using the following formula:
Q=60VA
Q (air volume)=m3/min
V (wind speed)=m/sec
A (cross-sectional area)=m2

Key points for use:During operation, the current consumed by the motor increases with the increase of pressure and vacuum degree. If the current is too high, it will cause the contactor load to trip. To prevent tripping, a vacuum or pressure relief valve can be installed on the suction or exhaust side.

Our services
1. Professional sales engineers provide users with overall design solutions and help them consult and solve problems in a timely mannerThe use of;
2. Dedicated sales and service personnel to assist users in the installation and debugging of products and hosts;
3. Promote product performance and maintenance of oil pipes to users;
4. The company has sufficient spare parts to ensure that user equipment can receive timely maintenance and repair;
5. Consult or visit users and keep records of their usage, and provide feedback to relevant departments;
6. The service principle is to serve customers with * service, maximum speed, and * attitude.

Performance characteristics:
1. * Type, noiseless: The motor runs directly, and by adding an integrated sound suppression device, the high noise of the high-pressure fan is improved, thus achieving the effect of *.
2. High reliability: When the usage situation changes, the machine can still operate safely. Apart from the impeller, the high-pressure blower has no other actions, so its high reliability is almost maintenance free. Using precision outer bearings with good heat dissipation, it has the following advantages: high compression ratio; The operating temperature of the bearing is low; Long service life of lubricating grease; No maintenance required.
3. Easy to install and fully equipped, can be installed and used at any time for compressed air or vacuum pumping, and can also be installed in any horizontal or vertical direction.
When the impeller rotates without oil or pollution, it does not come into contact with any parts and is lubrication free, thus ensuring no pollution.
5. Zui High Quality After 20 years of professional manufacturing experience, Zui Precision Machinery Design, combined with careful motor and standard instrument testing, all parts can meet Zui's high quality requirements. Using standard IP54, F-class motors have high efficiency and very few faults. There is a shaft seal test between the motor and the blower to prevent foreign objects from entering. At the same time, to ensure functional effectiveness, each blower undergoes strict testing before leaving the factory.

Precautions for use
No matter which brand it isBoth require protection in two aspects: pressure and dust.
For pressure, a pressure relief valve is often used, which is an unloading valve. When the operating pressure of the high-pressure fan exceeds the set pressure of the pressure relief valve, the pressure relief valve will automatically open to release the excess pressure and protect the high-pressure fan.
For dust, filters are often used. It often uses filter cartridges with different filtration accuracies according to different usage scenarios. Different filter cartridges have different maintenance methods and service lives, which need to be clarified when ordering.
In some special occasions, special protection is also necessary: for example, when using in a sealed environment, attention should be paid to ventilation and heat dissipation; When the ambient temperature (intake temperature is relatively high), it is more important to pay attention to ventilation and heat dissipation, or choose a high-pressure fan that allows for a higher intake temperature (such as a full air ring blower that allows for an intake temperature of up to 130 ° C);
For certain brands of high-pressure fans, there may be their own usage recommendations. Before purchasing, it is important to have a detailed understanding.