1.5kw high-pressure blower specifically designed for flatbed printers

1.5kw high-pressure blower specifically designed for flatbed printersAdopting pure copper motor, the structure is compact, the volume is small, the weight is light, the noise is low, and the air source sent out is free of water and oil, which is more energy-saving and environmentally friendly. The impeller is composed of dozens of blades, similar to the impeller of a large gas turbine. The air in the middle of the impeller blades is subjected to centrifugal force and moves towards the edge of the impeller, where it enters the annular cavity of the pump body and circulates again in the same way from the starting point of the blades. The circulating airflow generated by the rotation of the impeller generates energy that leaves the fan for use.

Structure of 1.5kw high-pressure blower for flatbed printer

1. The impeller is directly installed on the motor for non-contact compression, ensuring the reliability of the machine even under the largest pressure difference. 2. Adopting a wide voltage dual frequency (50/60HZ) motor with a protection level of IP55. 3. By using imported NSK bearings, the fan can withstand high temperatures and improve its service life and reliability. 4. Oil free and water free compression. 5. Meets safety usage requirements in Europe, North America, Australia, and has obtained European CE certification. 6. Low noise greatly improves the production environment for customers.

Characteristics of a 1.5kw single-phase high-pressure blower specifically designed for flatbed printers

1. It has dual functions of blowing and suction, and can be used for both suction and blowing; 2. Running with little or no oil, the output air is clean; 3. Compared to centrifugal fans and medium pressure fans, their pressure is much higher, often more than ten times that of centrifugal fans; 4. The pump body is die cast as a whole and uses shockproof mounting feet, so its requirements for the installation foundation are also very low. It can even operate normally without fixing the feet, which is very convenient and saves installation costs and installation cycles; 5. Maintenance free use; Its wear and tear parts are only the front and rear two bearings, which basically do not require maintenance during the warranty period.