Tape slitting machine high-pressure fan

Tape slitting machine high-pressure fanFeatures:

1. It has dual functions of blowing and suction, and can be used for both suction and blowing;

2. Running with little or no oil, the output air is clean;

3. Compared to centrifugal fans and medium pressure fans, their pressure is much higher, often more than ten times that of centrifugal fans;

4. If the pump body is die cast as a whole and shockproof mounting feet are used, the requirements for the installation foundation are also very low. It can even operate normally without fixing the feet, which is very convenient and saves installation costs and installation cycles;

5. Compared to similar fans, its operating noise is lower, just like our company's introduction of a super vortex fan:

6. Maintenance free use; Its consumable parts are only two bearings, which basically do not require maintenance within the warranty period;

7. The mechanical wear of the vortex blower is very small because there are no other mechanical contact parts besides the bearings, so the service life is naturally very long. As long as it is under normal operating conditions, 3-5 years is no problem;

8. Easy to install and use!

9. The overall material is made of aluminum alloy, and the motor is an explosion-proof motor, which will not produce sparks due to friction, making it more reliable to use and having better explosion-proof performance.

Tape slitting machine high-pressure fan

Installation instructions for high-pressure vortex air pump:

1. The high-pressure vortex air pump should be placed in a relatively stable place, and the surrounding environment should be clean, dry, and ventilated.

2. The rotation direction of the impeller of the high-pressure vortex air pump must be consistent with the direction indicated by the arrow on the fan casing.

Performance and characteristics of high-pressure fan:

1. Beautiful surface

2. Special blade design, high airflow, low noise, and long lifespan.

3. Using aluminum alloy material, significantly reducing weight and achieving the goal of lightweighting.

4. The motor is a fully enclosed external fan type aluminum frame motor with a special axis design, which can be used for a full length of time.

5. Cooling system running bearings, low maintenance, long-life lubricating grease, oil-free air.

6. High pressure ratio, suitable for 50/60Hz wide voltage motors.
7. Wide performance range, complete variety of styles, and abundant inventory. (Can replace all fans of the same type)

8. Special air volume control damper, with high stability in air volume control and easy operation

9. No vibration, therefore complete dynamic stability.

10. Easy to install, can be installed in any direction along the axis.

11. Can work continuously for 24 hours without interruption.

12. The blades and covers of the high-pressure fan are made of the world's hardest ADC12 material, equivalent to the same material as Mercedes Benz wheel rims.

13. The bearings of the high-pressure fan adopt high-speed and high temperature resistant imported NSK bearings, which can rotate at 2800 revolutions per minute at 50Hz and 3450 revolutions per minute at 60Hz, without lubrication and maintenance for 20000 hours, equivalent to continuous operation for 2 years.

14. The high-pressure fan has two functions: air supply and suction. It adopts Siemens technology and passes gas that is oil-free and dry. The high-pressure fan is suitable for auxiliary equipment in multiple mechanical industries.