Vibration knife cutting machine matched with high-pressure fan

Vibration knife cutting machine matched with high-pressure fanfeature:The appearance of the high-pressure fan has been carefully polished, with a smooth and shiny surface that gives a comfortable feeling. In terms of production technology, each process undergoes strict testing and passesCE certification, with a suction capacity of up to 2500m3/h and a pressure difference of up to 780mbar, using wide pressure dual frequency, using parts that meet the requirements, using standard IP55, F-class high-efficiency motors, with very few faults, meeting the standards. The impeller is composed of dozens of blades, similar to the impeller of a large gas turbine. The air in the middle of the impeller blades is subjected to centrifugal force and moves towards the edge of the impeller, where it enters the annular cavity of the pump body and circulates again in the same way from the starting point of the blades. The circulating airflow generated by the rotation of the impeller leaves the air pump with high energy for use. The fan adopts a dedicated motor, with a compact structure, small size, light weight, low noise, and no water or oil in the air source sent out. Good performance; The more reliable the quality and performance, the smoother it can run continuously for 15000 hours without any maintenance. We guarantee that the all wind annular vortex blower can be used in both high and low temperature conditions, whether in tropical rainforest areas, high-altitude areas above 1000 meters, or deserts. Our products can work continuously, safely, reliably, and for a long time.

Vibration knife cutting machine matched with high-pressure fanconfiguration：

1. Material of the chassisHigh strength die cast aluminum is used, which has the same aluminum material as Mercedes Benz wheel rims. High pressure and high-speed filling die cast aluminum profiles are the two major characteristics of die cast aluminum. The commonly used injection specific pressure ranges from several thousand to tens of thousandskPa， Even up to 2 × 105kPa. Compared to ordinary aluminum alloys, die cast aluminum is more sturdy and has a more lightweight effect compared to iron shell fans.

2. Motor performanceAdopting an efficient high-speed aluminum shell motor, it is a wide frequency, wide voltage motor, listed as single-phase110V/230V industrial three-phase: 220/380/415/660V, etc., speed: 2850-3700rpm, motor frequency can be adjusted from 45-75HZ, IP55 protection level F insulation level, its advantages are technology that domestic motors cannot achieve, and it is highly favored by domestic and foreign customers.

3. Fan oil seal: Adopting GermanyMERKEL oil seal, made of German MERKEL material made of fluororubber, can withstand temperatures ranging from -25 ℃ to 300 ℃. Compared to the general oil seal, its lip temperature is 20-50 ℃ higher than the working medium temperature during operation, making it more stable in performance, maintenance free, and has a longer lifespan.

4. Fan bearingsCore components are adopted ORS Türkiye, Germany SKF, Japan NSK brand bearings can withstand 350 ℃, 4000 rpm. For domestically produced Luo axis, human centered bearings have stable performance, low noise, maintenance free, longer service life, and can ensure longer operation of the fan.