6T boiler desulfurization and dust collector

NegotiableUpdate on 07/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Introduction to 6T boiler desulfurization and dust collector: The technical characteristics of 6T boiler dust collector include integrated desulfurization and dust removal, compact structure, small equipment footprint, and low investment cost

Product Details

Process principle of 6T boiler dust remover: 6T boiler dust remover uses a wet desulfurization and dust removal technology developed based on the mechanism of multiphase turbulent mass transfer, combines centrifugal water film dust removal and spray boiling desulfurization and dust removal, accelerates the flue gas with dust and harmful gas through Venturi and a special cyclone, and collides with the atomized liquid sprayed in front of Venturi and the desulfurization liquid sprayed at the upper end of the tower to form a rotary shear force. Gas and liquid are rotated at high speed, and rise into the boiling reaction layer after full mixing. The dust and harmful gas in the flue gas are captured and absorbed by the fine liquid particles in the desulfurization liquid. As the atomized liquid particles produce a large number of interfaces, the unit liquid volume The efficiency of collecting and absorbing smoke and dust and harmful gases is high. The purified flue gas is discharged into the atmosphere through a dehydrator, induced draft fan, and chimney.

The technical characteristics of the 6T boiler dust collector include integrated desulfurization and dust removal, compact structure, small equipment footprint, and low investment cost; Desulfurizers can be used as soda ash calcium oxide, slag flushing water magnesium oxide, slag flushing water lime, or other alkaline wastewater; The system is easy to operate, stable to run, and easy to maintain; Corrosion resistance Strong adaptability The boiler dust collector produced by our factory is suitable for various types of boilers and kilns, including large, medium, and small ones. It is also suitable for high smoke concentration in silicon iron furnaces, silicon calcium furnaces, and other flue gas that is difficult to treat in sawdust fuel boilers, straw fuel boilers, and wood fuel boilers.