DMC brine pump

NegotiableUpdate on 03/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Structural features: Pump body: The pump body is radially divided and consists of an inlet section, a middle section, and an outlet section to form a multi-stage pump. The middle section is sealed with O-rings. The shaft is made of special materials and designed with a positioning shoulder for easy installation and maintenance. The impeller is driven by key linkage, and there are replaceable sealing rings on the middle section and guide vanes. Shaft seal, the liquid inside the pump is sealed by packing or mechanical seal. DMC brine sugar pump adopts a single end face with some sealing, connected to flushing water, and coupling: a flexible coupling must be used to allow axial, radial, and angular displacement of the shaft, which is more conducive to smooth operation,

Product Details

DMC brine pump

DMCBrine pumpStructural features:Pump body: The pump body is radially divided and consists of an inlet section, a middle section, and an outlet sectionMulti-stage pump.The middle section consists of various partsO-ringsseal up.axleMade of special materials and designed with positioning shoulders for easy installation and maintenance.The impeller is driven by key linkage, and there are replaceable sealing rings on the middle section and guide vanes. The liquid inside the shaft seal pump is sealed tightly by packing or mechanical seal, DMCThe brine sugar pump adopts a single end face with some sealing, connected to flushing water,Couplings: Flexible couplings must be used to allow for axial, radial, and angular displacement of the shaft,More conducive to smooth operation，Adopting two end support, using rolling bearings, without bearing shells, eliminating the need for more cooling water,Execution standardaccurateAPI610。

Parameter range ：

Traffic:2～ 1000 m³/h

Lift: 10-2400m

Design temperature:- thirty℃～210 ℃

Design pressure:~ 27MPa