Dust humidifier

NegotiableUpdate on 06/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Introduction to Dust Humidifier: The dust humidifier equipment features a compact structure, good overall performance, advanced technology, reasonable process, high reliability, and low failure rate

Product Details

Dust humidifiers are mainly used for ash storage in thermal power plants, steelmaking plants, ironmaking plants, chemical plants, and other departments for water spraying wet mixing and conveying of powdered materials. This machine is used for uniformly stirring and conveying powdered materials to achieve dust-free conveying requirements. Dust humidifiers are also suitable for humidifying, stirring, and transporting materials containing solid particles in chemical and mining industries.

Steps for using a dust humidifier

The use of a dust humidifier requires certain steps to be carried out in an orderly manner:

1. The machine should be started and operated normally before feeding, water supply, and shutdown. The feeding should be stopped first, and the machine should be stopped after the materials in the standby mode are unloaded.

Before starting, it is necessary to carefully check whether all parts are complete, whether the fasteners are tightened, and whether the sealing parts are tight.

3. Inject No. 30 or No. 40 mechanical oil into the reducer, and users can also choose suitable lubricating oil according to local conditions before putting it into normal operation.

Characteristics of Dust Humidifier Equipment

The whole machine has the characteristics of compact structure, good overall performance, advanced technology, reasonable process, high reliability, good sealing performance, adjustable water volume, small wear, large processing capacity, long service life, continuous operation, and low failure rate.

Requirements for the use of dust humidifiers

Before starting the dust humidifier, it is necessary to carefully check whether all parts are complete, whether the fasteners are tightened, and whether the sealing parts are tight.

2. Inject No. 30 or No. 40 mechanical oil into the reducer before it can be put into normal operation.

3. The dust humidifier should be started and operated normally before feeding, supplying water, and stopping the machine. The feeding should be stopped first, and the machine should be stopped after the materials inside are unloaded.

If the motor load suddenly increases or decreases during operation and there are abnormal phenomena in the mechanical system, the machine must be stopped immediately for inspection and troubleshooting.