High concentration waste liquid incinerator (including saline waste liquid)

High concentration waste liquid incinerator (including saline waste liquid)

1、 Main purpose and introduction:

high concentrationWaste liquid incinerator (including salt waste liquid)It is a type of incinerator for treating waste liquids, which uses high-temperature pyrolysis at 900-1300 ℃ to fully dissolve organic compounds and hazardous chemicals containing chlorine, benzene, and phenols in the waste liquid. It is very suitable for high concentration organic chemical waste liquids and is used in manufacturing industries such as ships, chemical plants, pharmaceuticals, printing and dyeing factories, paper industry, and electronic devices.

2、 Construction and Characteristics:

1. The micro air pressure design scheme has a high ignition safety factor. In the management program, it is necessary to remove flammable and explosive materials before igniting the furnace to prevent gas explosion.

2. High level of automation technology, multi-directional online monitoring and manipulation, stable ignition.

3. Using high-quality atomizing spray guns, extremely small particles are sprayed out to ensure vaporization and air oxidation dissolution above the furnace body, making it difficult to disperse.

4. Using a common tangent ignition as the internal hybrid two fluid dynamic atomizer for atomization equipment, its mixing level, actual atomization effect, ignition rate *, low overcapacity gas, can save a lot of natural materials.

5. Vortex is easy to use, with a ignition dwell time of about 2 seconds and no blind spots when ignited.

6. Waste engine oil, waste liquid, and waste organic solvents are solved together to treat waste with waste and operate at low cost.

7. Low nitrogen ignition technology, smoke control and odorless, no harmful substances, can be incinerated together to treat industrial waste gas and small amounts of liquids.

8. Based on the characteristics and composition of wastewater, design a salt containing wastewater incinerator to ensure that there is no slag accumulation during inorganic salt incineration treatment.

9. Well equipped and effective waste gas cleaning equipment to ensure environmental protection and qualified discharge.

3、 Processing capacity: 50-5000kg/h

4、 Process: Ultra low temperature thermal cracking, high temperature air oxidation

5、 Application areas: Chemical plant waste liquid, non flammable high concentration wastewater, waste acid, waste alkali, flammable waste engine oil, waste organic solvents, non PCB circuit boards, and various high salt wastewater.