IBW horizontal detachable centrifugal pump

NegotiableUpdate on 03/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Detailed information on IBW horizontal detachable centrifugal pump: IBW horizontal detachable centrifugal pump is a new generation of energy-saving and environmentally friendly vertical centrifugal pump developed independently based on ISW pipeline centrifugal pump technology

Product Details

Detailed information on IBW horizontal detachable centrifugal pumpIBW horizontal detachable centrifugal pump is a new generation of energy-saving and environmentally friendly vertical centrifugal pump developed independently based on ISW pipeline centrifugal pump technology. This series of pumps has excellent performance, high reliability, long service life, reasonable structure, beautiful appearance, and is easy to disassemble and replace corresponding accessories.

Product features of IBW horizontal detachable centrifugal pump：

Smooth operation: The absolute concentricity of the pump shaft and excellent dynamic and static balance of the impeller ensure smooth operation without any vibration. Drip proof: Hard alloy seals made of different materials ensure that there is no leakage during the transportation of different media. Low noise: The water pump supported by two low-noise bearings runs smoothly, with almost no noise except for weak motor noise.

Low failure rate: The structure is simple and reasonable, and the key parts are of world-class quality; The fault free working time of the whole machine has been greatly improved.

Easy maintenance: Replacing seals and bearings is simple and convenient.

Easy installation: The flexible flange structure makes the installation of the pump much easier. This centrifugal pump is used for transporting liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. It is suitable for industries such as petroleum, chemical, metallurgical, power, papermaking, and pharmaceuticals, with a temperature range of -20 ℃ to+105 ℃.

1. The suction pressure is ≤ 1.6MPa, or the maximum working pressure of the pump system is ≤ 1.6MPa, that is, the pump suction inlet pressure+pump head is ≤ 1.6MPa, and the pump static pressure test pressure is 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should be separately stated when ordering, so that the overcurrent and connection parts of the pump can be made of cast steel materials during manufacturing.

2. Environmental temperature<40 ℃, relative humidity<95%.

3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm. Note: If the medium used has small particles, please indicate it when ordering so that the manufacturer can use wear-resistant mechanical seals.