IHW ISWH DN80 stainless steel horizontal self-priming pump

NegotiableUpdate on 03/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

IHWISWHDN80 stainless steel horizontal self-priming pump product features: 1. The shaft seal adopts mechanical seal or mechanical seal combination, using imported titanium alloy sealing ring, medium-sized high-temperature resistant mechanical seal, and hard alloy material, wear-resistant seal, which can effectively extend the service life of the mechanical seal

Product Details

IHW ISWH DN80 Stainless Steel Horizontal Self priming Pump Product Features：
1. The shaft seal adopts mechanical seal or a combination of mechanical seals, using imported titanium alloy sealing rings, medium-sized high-temperature resistant mechanical seals, and hard alloy materials for wear-resistant seals, which can effectively extend the service life of mechanical seals.

2. Easy installation and maintenance, no need to disassemble the pipeline system, just remove the pump coupling nut to extract all rotor components.

3. Pumps can be operated in series or parallel according to the requirements of flow rate and head.

4. Vertical and horizontal installation of pumps can be adopted according to the requirements of pipeline layout. Working conditions for IHGB stainless steel explosion-proof high-temperature pumps

Working Principle:

1. The suction pressure is ≤ 1.0MPa, or the maximum working pressure of the pump system is ≤ 1.6MPa, that is, the pump suction inlet pressure+pump head is ≤ 1.6MPa. The pump static pressure test pressure is 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should be separately stated when ordering, so that the overcurrent and connection parts of the pump can be made of cast steel materials during manufacturing.

2. Environmental temperature<40 ℃ C, relative humidity<95%

3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm.

Technical Specifications:Flow rate: 5-800m3/h;

Head: 12-60m;

Motor power: 2.2-55KW;

Speed: 1450-2900r/min;

Caliber: 25-300;

Medium temperature: ≤ 100 ℃;

Self suction height: 4.5-6.0m.