MBBR integrated sewage treatment equipment

NegotiableUpdate on 03/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The MBBR integrated sewage treatment equipment adopts elastic three-dimensional composite packing, which has a large specific surface area, long service life, easy film formation, corrosion resistance, and does not clump or block. The filling material can freely stretch in the water, cutting the bubbles in multiple layers, which relatively increases the aeration effect

Product Details

MBBR integrated sewage treatment equipmentworkmanship

The oxygen required by microorganisms in biological contact oxidation is supplied through artificial aeration. After the biofilm grows to a certain thickness, microorganisms near the packing wall undergo anaerobic metabolism due to hypoxia. The gas produced and the scouring effect of aeration can cause the biofilm to detach and promote the growth of new biofilm, forming the metabolism of biofilm. The detached biofilm will flow out with water. Compared with conventional activated sludge processes, biological contact oxidation has the following advantages: it has a higher volumetric load; Generally, there is no need for a sludge return system, and there is no problem of sludge expansion, making operation and management simple; Has strong adaptability to sudden changes in water quality and quantity; The sludge production is lower than that of activated sludge method.

Sewage source:

To obtain sewage as close as possible to the water quality of ship sewage treatment, sewage pumps are installed directly in the septic tank without sedimentation. The start and stop of the sewage pump are controlled by the liquid level gauge inside the equipment. When the liquid level in the settling tank is at a low level, the sewage pump starts. When the liquid level reaches a high level, the sewage pump automatically stops.

MBBR integrated sewage treatment equipmentadvantage

(1) Small footprint, only 10-20% of traditional craftsmanship; Small footprint, saving land costs. As an integrated device, it has the characteristics of small space occupation and easy integration;

(2) The preprocessing process is simple, does not require a large amount of chemical agents, and the operation process is simple;

(3) High recovery rate, with a water recovery rate of over 99%. This flexibility allows operators to reduce the "pressure" on the diaphragm by lowering the recovery rate when the quality of the incoming untreated water deteriorates, while producing the same total amount and quality of purified water;