Organic waste incineration furnace (high-temperature oxidation incineration)

Organic waste incineration furnace (high-temperature oxidation incineration)

Processing capacity: 50-5000kg/h

Treatment method: Organic waste liquid high-temperature oxidation incineration

Scope of application: Chemical waste liquid, non combustible high concentration wastewater, waste acid, waste alkali, combustible waste oil, waste solvent, non PCB and various high salt wastewater, etc.

1Organic waste incineration furnace (high-temperature oxidation incineration)Usage and Introduction:

This device is a specialized incinerator for processing liquid waste, utilizing high temperatures (850-1300 ℃) to fully oxidize and decompose organic matter and harmful compounds containing chlorine, benzene, and phenols in the waste liquid. It is particularly suitable for high concentration organic waste liquids and is widely used in industries such as ships, chemicals, pharmaceuticals, printing and dyeing, papermaking, and electronics.

2、 Structure and characteristics:

1. Micro negative pressure design ensures high combustion safety, and the control program includes a function to prevent gas explosion if flammable and explosive gases are not eliminated before ignition in the furnace.

2. High degree of automation, online detection and control, stable combustion.

3. The dual fluid premixed atomizing spray gun is used to spray extremely fine foam droplets, increase the specific surface area of waste liquid in the high temperature zone of the furnace, and ensure the rapid gasification and oxidation decomposition of waste liquid in the furnace.

4. Adopting a tangential combustion atomization device with an internal hybrid two fluid atomizer, its mixing degree, atomization effect, combustion speed *, low excess air, can save a lot of fuel.

5. Good vortex effect, combustion retention time of more than 2 seconds, combustion *.

6. Simultaneous treatment of waste oil, waste liquid, and waste solvent, using waste to treat waste, with low operating costs.

7. Low nitrogen combustion technology, smoke-free, odorless, and free of harmful gases, can simultaneously incinerate organic waste gas and a small amount of solids.

8. Based on the characteristics and composition of wastewater, a salt containing wastewater pyrolysis incinerator is designed to ensure that inorganic salts do not melt or slag during incineration, and to prevent the formation of salt mist floating out of the furnace.

9. Complete and reasonable tail gas treatment and purification equipment to ensure environmental emissions meet standards.