Imported mixed recycler steam jet heater

ImportSteam jet heater for mixed recyclerIntroduction

Pipeline type steam jet heater uses steam to directly heat the water flowing in the pipeline. The water flows out of the steam jet heater and reaches the required temperature

Pipeline type description: Installed in a pipeline system, it directly heats the liquid inside the pipeline, which is calledPipeline type.

Classification:

Divided into: detachable type and non detachable type.

1For continuous use of steam heating and uninterrupted operation, non detachable type shall be adopted. Mainly used for heating production process water in large and medium-sized enterprises.

2Only for intermittent operation and easy scaling, a detachable type is used.-----For example: heating of raw water and heating water in power plants

Characteristics and advantages of pipeline type steam jet heater:

1No water hammer - because the occurrence of "water hammer" requires vibration, even huge vibration, which is extremely unsafe.

2No vibration - If there is vibration, it seriously endangers the safety and normal production of the enterprise.

3Low noise - Noise can harm the physical and mental health of on-site workers.

4No temperature stratification - that is, heating and mixing evenly without emitting steam.

5Fast heating, and at the same time, due to direct heating, the utilization rate of steam is as high as99%

6Maintenance free and durable.

ImportMixed recycler Steam jet heaterUsage conditions and requirements:

At the entrance of this device, it is necessary to meet the following requirements:

1The inlet pressure is0.05----0.6MPa(G).

2Saturated steam pressure, greater than inlet pressure0.1MPa, in0.15----0.7MPa(G)between.

3Heating only: "Production process water, power plant raw water, heating water, and domestic water that are non corrosive, non viscous fluids, and do not contain suspended solids or sediments.

Explanation: Heating of liquids that do not meet the above usage requirements can be specially manufactured

1、 Pipeline type steam jet heater--Using steam to directly heat the water flowing inside the pipeline. Specially used for heating production process water, heating water, domestic water, and power plant raw water. The focus is on heating the production process water and sewage of the enterprise

2、 Specialized steam jet heater.---Special customization is required. Specially designed for:

1.Heating corrosive liquids. For example: sulfuric acid water, alkaline water, etc.

2.Heating viscous fluids or fluids containing suspended solids or sediments. For example: papermaking black liquor, pulp, slurry, mud, kitchen waste filtrate, oil, heavy oil, or wastewater containing "suspended solids and sediments")95High temperature water, etc. Main solutions: vibration, noise, blockage, water hammer, steam emission, and other issues.

3.Including: various specialized steam jet heaters (tank type, pipe type) installed on water tanks, water tanks, and pipelines.

Design and purchaseTechnical parameters to be provided for steam jet heater

If it is installed in a pipeline and directly heats the liquid flowing inside the pipeline, please provide:

1The composition, concentration, viscosity, and other conditions of the heated medium. Initial temperature, final temperature.

2The pressure (gauge pressure) of the heated medium at the inlet of this steam jet heater.

3Saturated steam, the pressure (gauge pressure) at the inlet of this steam jet heater.

4Is it a horizontal installation, with liquid entering and exiting horizontally? Or is it installed vertically? Does the liquid flow in and out vertically (or downwards)?

5Is liquid heated in one go? Repeated cycle heating? Is it an open system, semi closed system, or closed system?

6Is it a 'suspended installation' in the air? Is it located on the first floor or the top floor?

If it is installed in a water tank, please explain. Meanwhile, please provide:

1The composition, concentration, viscosity, and other conditions of the heated medium.

2Saturated steam, the pressure (gauge pressure) at the inlet of this steam jet heater.

3Installation method, etc.

install

1There are horizontal and vertical installations available2Method and suggestion: Provide explanations during design and procurement.

2In special circumstances, such as when the steam inlet is downward, it can also be specially manufactured

application

Mainly used for heating production process water flowing in pipelines, power plant raw water, heating water, and domestic water.

Application example: Steam jet heaters have a wide range of applications, including one-time heating and cyclic heating. Sometimes, it can also be used for gas-liquid mixing, liquid-liquid mixing.

Application example: Applied in disposable one-way heating systems, mainly providing hot water and high-temperature water for daily life and production (such as bathhouses, bathrooms, restaurants, swimming pools, hotels and restaurants). Steam is directly sprayed into the liquid through a heater, thereby heating the liquid to a certain temperature. To ensure stable heating temperature, control instruments such as steam regulating valves are installed on the steam side. Because it can quickly heat up to the rated temperature, users can quickly obtain hot water in the required quantity when needed, which is extremely convenient and practical

Application example: The circulating heating system for water used in the production process of enterprises is mainly used in the production process system to ensure stable liquid temperature or in situations where there are certain process requirements for temperature rise. This is the process of the circulating heating system. On the one hand, the system circulates the liquid in the pipeline, and at the same time slowly sprays steam to heat it to a given temperature, which is then used for heat exchange in the reaction tank and continues to circulate heating.

Application example: Used in heating, air conditioning, and hot water supply systems, where hot water circulates in pipelinesQBy means of self-control instruments, it is often maintained at a given temperature. Meanwhile, since it can form a circulation system, there is no need to set up a hot water storage tank (but an overflow tank should be considered). in the pictureQ1Represents hot water supply,Q2Represents circulating water,Q3Indicating the return of water,Q4Indicate water supply

Application example: When the temperature of water is high, it is better to place the steam jet heater on the outlet side of the water pump

Introduction to specialized steam jet heaters (including pipeline and tank types):

Description: Tank type: installed inside the water tank, referred to as'Tank type'

If not satisfied“WBSType steam jet heaterWQHSoda mixerWBXType steam silencing heaterWBPThe usage conditions of steam injectors include "viscous fluids, corrosive liquids, liquids containing suspended solids, and sediments",RETZCan be specially manufacturedWPQSpecialized "steam jet heater" (tube type, tank type.).

RETZProficient in designing and manufacturing steam direct heating: various specialized products for sulfuric acid water, alkaline water, papermaking black liquor, pulp, slurry, syrup, mud, kitchen waste filtrate, oil, heavy oil, or wastewater containing suspended solids and sedimentsWPQSpecial steam jet heater

1Slurry heater.

2Pulp heater.

3Syrup heater.

4Kitchen waste filtrate heater.

5Oil heater.

6Wastewater heaters containing suspended solids and sediment.

7Mud heater.

8Paper making black liquor and white water heater.

9A high-temperature water heater that does not emit steam.

10Sulfuric acid water heater, alkaline water heater.

11A raw water heater that directly heats water with superheated steam.

12A steam water mixer with extremely low inlet pressure.

13Steam jet (conveying) pumps for extracting and transporting water with steam.

14A specialized steam jet heater for liquids in a pool with a mixer